Slitting Saws / Jewelers Saws
Standard Tolerances:
Outside Diameter:
+.020/-.000. This allows for extra re-sharpening in operations where saws are not ganged.
Note! Upon special request OD can be held to +.002/-.000 at no extra charge.
Hole Diameter
+.0005/-.0000 is standard, but can be held to +.0002/-.0000 upon special request at no additional charge.
Thickness:
+.0005 to -.0005
Saws are also available in metric sizes.
Resharpening services available.
Due to the current material pricing volatility, all saws will need to be quoted. Please email
adamw@socarb.com or
sales@socarb.com for up to date prices/leads.
| OD | THK RANGE | ID |
|---|
| 1 | .008-.075 | 3/8, 1/2 |
| 1 | .075-.140 | 3/8, 1/2 |
| 1 1/4 | .008-.074 | 3/8,1/2 |
| 1 1/4 | .075-.140 | 3/8,1/2 |
| 1 1/2 | .008-.074 | 1/2 |
| 1 1/2 | .075-.140 | 1/2 |
| 1 3/4 | .008-.074 | 1/2,5/8 |
| 1 3/4 | .075-.140 | 1/2,5/8 |
| 2 | .008-.074 | 1/2,5/8 |
| 2 | .075-.140 | 1/2,5/8 |
| 2 1/4 | .008-.074 | 5/8 |
| 2 1/4 | .075-.140 | 5/8 |
| 2 1/2 | .008-.074 | 1.00 |
| 2 1/2 | .075-.140 | 1.00 |
| 2 3/4 | .008-.074 | 1.00 |
| 2 3/4 | .075-.140 | 1.00 |
| 3 | .015-.074 | 1.00 |
| 3 | .075-.140 | 1.00 |
| 4 | .020-.074 | 1.00 |
| 4 | .075-.140 | 1.00 |
Keyway Cutters
SCS Keyway Cutters are super-finished for longer life. For precision keyways in material up to 60 Rockwell-C with finishes comparable to a ground surface. All SCS Keyway Cutters are supplied with 1/2" diameter steel shanks, or can be made with carbide shanks to your specification.
| SCS | OD | THK | OAL | FLUTES |
|---|
| KW 202 | 1/4 | 1/16 | 2 1/16 | 6 |
| KW 203 | 3/8 | 1/16 | 2 1/16 | 8 |
| KW 303 | 3/8 | 3/32 | 2 3/32 | 8 |
| KW 403 | 3/8 | 1/8 | 2 1/8 | 8 |
| KW 204 | 1/2 | 1/16 | 2 1/16 | 10 |
| KW 304 | 1/2 | 3/32 | 2 3/32 | 10 |
| KW 404 | 1/2 | 1/8 | 2 1/8 | 10 |
| KW 305 | 5/8 | 3/32 | 2 3/32 | 10 |
| KW 405 | 5/8 | 1/8 | 2 1/8 | 10 |
| KW 505 | 5/8 | 5/32 | 2 5/32 | 10 |
| KW 605 | 5/8 | 3/16 | 2 3/16 | 10 |
| KW 406 | 3/4 | 1/8 | 2 1/8 | 10 |
| KW 506 | 3/4 | 5/32 | 2 5/32 | 10 |
| KW 606 | 3/4 | 3/16 | 2 3/16 | 10 |
| KW 706 | 3/4 | 7/32 | 2 7/32 | 10 |
| KW 806 | 3/4 | 1/4 | 2 1/4 | 10 |
| KW 507 | 7/8 | 5/32 | 2 5/32 | 12 |
| KW 607 | 7/8 | 3/16 | 2 3/16 | 12 |
| KW 707 | 7/8 | 7/32 | 2 7/32 | 12 |
| KW 807 | 7/8 | 1/4 | 2 1/4 | 12 |
| KW 608 | 1" | 3/16 | 2 3/16 | 12 |
| KW 708 | 1" | 7/32 | 2 7/32 | 12 |
| KW 808 | 1" | 1/4 | 2 1/4 | 12 |
| KW 1008 | 1" | 5/16 | 2 5/16 | 12 |
| KW 1208 | 1" | 3/8 | 2 3/8 | 12 |
| KW 609 | 1 1/8 | 3/16 | 2 3/16 | 14 |
| KW 709 | 1 1/8 | 7/32 | 2 7/32 | 14 |
| KW 809 | 1 1/8 | 1/4 | 2 1/4 | 14 |
| KW 1009 | 1 1/8 | 5/16 | 2 5/16 | 14 |
| KW 610 | 1 1/4 | 3/16 | 2 3/16 | 14 |
| KW 710 | 1 1/4 | 7/32 | 2 7/32 | 14 |
| KW 810 | 1 1/4 | 1/4 | 2 1/4 | 14 |
| KW 1010 | 1 1/4 | 5/16 | 2 5/16 | 14 |
| KW 1210 | 1 1/4 | 3/8 | 2 3/8 | 14 |
| KW 812 | 1 1/2 | 1/4 | 2 1/4 | 16 |
| KW 1012 | 1 1/2 | 5/16 | 2 5/16 | 16 |
| KW 1212 | 1 1/2 | 3/8 | 2 3/8 | 16 |
|
